|
|
Build Your Online Product Catalogs?
| Product Name: |
100,000 m3/y Autoclaved Aerated Concrete Block Pro
|
| Supply Ability: |
|
| Related proudcts |
|
| Specifications |
Production scheme 1.. Product: fly ash autoclaved aerated concr |
| Price Term: |
FOB,CNF,CIF,Other |
| Port of loading: |
|
| Minimum Order |
1set |
| Unit Price: |
100000USD/set |
|
Production scheme
1.. Product: fly ash autoclaved aerated concrete block with capacity of 100,000 m3.
1. 产品为粉煤灰加气混凝土砌块，产量为年?0万立方米?
4生产工艺流程简?
Brief introduction of process flow
1.Raw material storage and treatment
2.Batching, mixing and casting
Lime, cement and gypsum powder are separately conveyed by single-tube feeder at the bottom of storage silo into electric scale for powder material. After accumulated measuring, they are conveyed into casting mixer by discharge device on scale.
After the valve under the slurry tank opens, the fly ash slurry is directly put into slurry electric scale in batching plant for accumulated measuring. When the slurry weight reaches the requirement of batching, the automatic-control system will close discharge valve of slurry pump Measured slurry is directly put into casting mixer for mixing according to the instruction.
After manually measuring, aluminum powder is poured into aluminum powder mixer to make into suspension. Make once for one mould. The mixed suspension is directly put into casting mixer.
The slurry’s temperature should reach requirement for technology before casting. If temperature is not enough, steam shall be used here to heat. When casting, moulds are carried by ferry push car to be in place under casting mixer for casting.
3.Cutting and grouping
After stopping and maintaining to reach cutting strength, and is lifted by turning toplift of turn hoist (16t) and turned onto stationary support of cutter, to make the green blocks headstand when demoulding. Horizontal cutting and cross cutting will be done by cutting device to finish cut work.
The grouped green blocks together with side board will be lifted by semi-finished toplift of load hoist(8t) before autoclave to trolley before autoclave. One trolley three mould. The stacked trolleys are pulled by slow-motion windlass to the railway before autoclave for grouping. Put six trolleys on every railway.
4.Steam curing&finished product
T |
| Company: |
Yatai Yong Cheng (Beijing) Technical Development Co., Ltd.
|
| Contact: |
Ms. Yuedong chen |
| Address: |
Room 101, Sunny Corner , Chaoyang District, Beijing, China |
| Postcode: |
|
| Tel: |
86-311-68090312 |
| Fax: |
86-311-68090312 |
| E-mail: |
|
|
|
|
Home
